Many friends who know about CNC bending machines know that the CNC bending machine includes a stand, a worktable and a clamping plate, the worktable is placed on the stand, the worktable consists of a base and a pressure plate, the base is connected to the clamping plate through a hinge, the base consists of a seat shell, a coil and a cover plate, the coil is placed in the recess of the seat shell, the top of the recess is covered with a cover plate. In use, the coil is energised by a wire, which when energised exerts a gravitational force on the platen, thus enabling the clamping of the thin plate between the platen and the base. What is the principle and what are its advantages?
CNC bending machine working principle of the mould, concave die inlet corner and die core surface composition A, B, C three points, from these three points to determine the workpiece bending angle α, which C point is subject to large forces, it is directly related to the amount of material rebound α angle is correct or not, as long as the change in the size of the core "distance", can obtain different bending angle, angle control is in the Angle control is installed on the support a dial, and then in the core on the inflection arm driven pointer in the dial display, its characteristics are simple and intuitive angle control operation, without special moulds can be bent at different angles of the bus, its bending is